Our company is Chinese fluorine silicon organic material industrial association member, as well as the national petroleum, chemistry, electronic mechanical industry bureau and the corrosion preventing association fixed point.
 
 
　　 Polytetrafluoroethylene
　　 Plastic
　　 Rubber Series
　　 Nylon series
　　 Polyurethane Series
　　 JCB-CJ10

PRODUCTS Products：Polytetrafluoroethylene　-　Teflon mold clamp
 

TELFON MOLD CLAMP
1、Characteristic：
　　The teflon plate is produced in the aerosol teflon resin model figurating processing. It can bear chemistry corrosion well in the known plastic series and does not get aging. It has the best friction factor in the known solid material, in the non- load situation it can be used under the temperature between -180 ℃ ~ +260 ℃.
2、Purpose：
　　Anti-corrosive lining material and seal lining, supporting slide, guide rail, electric insulation components.
3．Specifications:
　　Within width 50mm～1800mm×thickness 1mm～100mm
Length（mm）×Width(mm) Thickness (mm)
Rating Tolerance
150×150 1.0-30 ±0.30-±0.50
250×250 1.5-30 ±0.30-±0.50
300×300 1.5-30 ±0.30-±0.50
450×450 1.5-30 ±0.30-±0.50
600×600 2-30 ±0.30-±0.50
800×800 3-30 ±0.30-±0.50
1000×1000 3-30 ±0.30-±0.50
1200×1200 3-30 ±0.30-±0.50
1000×2000 5-35 ±0.30-±0.60
1500×1500 5-30 ±0.30-±0.50
1800×1800 8-30 ±0.30-±0.50
2000×2000 8-30 ±0.30-±0.50

4.The key technical indexes :
Entry name Units Target
Form view density g/cm3 2.10-2.30
Tensile Strength ≥ MPa 15.0
Elongation at break ≥ % 150
Strength Solutions ≥ KV/mm 10
   
   
   
 

 
Copyright © 2007-2008 Yangzhong Yangcheng Electrical & Plastic Co.,Ltd All Right Reserved
Tel:0511-88321606　Fax:0511-88336140　Phone:13952901980　Email:wang@yc-yz.com